RotorFlight F722 V2.2 Gyroscope Built-in ELRS Receiver - Red
RotorFlight F722V2 Gyroscope Built-in ELRS Receiver - HeliDirect
RotorFlight F722 V2.2 Gyroscope Built-in ELRS Receiver - Red
RotorFlight F722V2 Gyroscope Built-in ELRS Receiver - HeliDirect

RotorFlight F722 V2.2 Gyroscope Built-in ELRS Receiver - Red

SteamRC
|
FD001-V2/RED
You will earn 95 points for buying this product
Price Match Guarantee
$95.00 $0.00( / )
Here is our set up which use with current FW on the Unit and Futaba 14SG, You can try if you want : HERE RotorFlight 2.0 Website (for Congifurator and Tutorial): https://www.rotorflight.org/ Includes: - RotorFlight F722 V2.2 Gyroscope Built-in ELRS Receiver x 1 set New points compare to V2: -...

Here is our set up which use with current FW on the Unit and Futaba 14SG, You can try if you want : HERE

RotorFlight 2.0 Website (for Congifurator and Tutorial): https://www.rotorflight.org/

Includes:

- RotorFlight F722 V2.2 Gyroscope Built-in ELRS Receiver x 1 set

New points compare to V2:

- Activated BEC voltage detection
- Activated 5V Bus voltage monitoring
- Optimization of motherboard and receiver lines

Configuration:

Main control: STM32F722RET6

Gyroscope: BMI270

Black Box: W25N01G (128MB)

Barometer: SPL06

Color light: WS2812

Buzzer: 5V active buzzer

USB：Type-C

Serial ports: UART2, UART3, UART5

I2C：I2C1

ADC：ADC1（12S）

Servo Channel: CH1-CH4

RPM input: RPM_E (ESC RPM line), RPM_S (RPM sensor)

Built-in receiver: ELRS dual antenna receiver 2.4G (serial port 1)

External receivers: CRSF, S.BUS, F.PORT, GHOST, SUMD, SUMH, IBUS, XBUS, XBUS/RJ01, EXBUS, PPM, MSP, DSM (with its own BEC step-down 3.3V power module)

BEC voltage: 5-15V

5V power output: 5V-1.5A

ESC protocols: PWM, ONESHOT125, ONESHOT42, MULTISHOT, BRUSHED, DSHOT150, DSHOT300, DSHOT600, PROSHOT

Disclaimer:

Rotorflight is open-sourced software, no warranty or implied as to the quality and reliability of this firmware, it is supported by the users themselves as a community.Rotorflight is under GPLv3 license. If handled incorrectly, RC models can cause serious injury or even death, and you are solely responsible for your model if you decide to use Rotorflight firmware. Any injury or damage caused by the use of Rotorflight firmware is not the responsibility of the authors of Rotorflight, the designers of RF gyroscopes, or the distributors, so please use with caution.

 

Type: 

Heli Flybarless Systems
Vendor: 

SteamRC
SKU: 

FD001-V2/RED
Weight: 

0.5 lb

Product Spare Parts

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Shane S.
Excellent FBL unit. Great hardware, great price

I chose this Rotorflight ELRS FBL because it has enough servo ports to run a nitro helicopter with onboard glow igniter. It’s no secret that learning Rotorflight takes some time. However, once you see a well tuned RF machine you will understand why it’s worth the effort. Excellent price, all the features of more expensive FBL’s (including full telemetry and rescue function) for a fraction of the price. The bigger companies better find a way to increase the value of their products to justify their pricing. At $100 with a built-in rx, metal casing, and state of the art IMU- this FBL unit is a win.

L
Leonardo F.
Rotorflight

Awsome Gyro

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Shane S.
Excellent FBL unit. Great hardware, great price

I chose this Rotorflight ELRS FBL because it has enough servo ports to run a nitro helicopter with onboard glow igniter. It’s no secret that learning Rotorflight takes some time. However, once you see a well tuned RF machine you will understand why it’s worth the effort. Excellent price, all the features of more expensive FBL’s (including full telemetry and rescue function) for a fraction of the price. The bigger companies better find a way to increase the value of their products to justify their pricing. At $100 with a built-in rx, metal casing, and state of the art IMU- this FBL unit is a win.

L
Leonardo F.
Rotorflight

Awsome Gyro