INJORA Micro Brushless MBL32 ESC for 1/18 1/24 RC Crawler

INJORA Brushless Micro MBL32 ESC for 1/18 1/24 RC Crawler TRX4M Ascent18 SCX24

Only comptible with INJORA 1/18 1/24 micro brushless motors:

• Purple Viper 1721 Motor
• Fat Viper 2204 Motor

Note:

• This ESC is not waterproof.
• Compatible with most of the receiver and remote combinations that with CH2
• Never plug the battery upside down, otherwise the ESC will immediately burn out！
• Instruction Manuals
• Programming Tutorial 

If your transmitter does not control the car well, please try these:

1. If you are using a 2S battery, please set the BEC output to 6.0V using the DIP switches. Different settings are required for 2S and 3S batteries!
2. Before powering on, set the transmitter's throttle trim to 0% at neutral.
3. Increase the distance between the transmitter and the car to avoid signal interference.
4. Please use a 2S battery of 750mAh or more, or a 3S battery of 450mAh or more. For optimal performance, we recommend using a 3S Lipo battery.

Features:

• The INJORA MBL32, based on the AM32 firmware, is meticulously tailored for Micro crawlers and is programmable.
  
• MBL32 features a built-in BEC with adjustable output: 6V/7.4V
  
• Plug-and-Play Convenience: Includes multiple adapter cables for different battery connectors.
  

ESC Specifications:

• Part Number: MBL32
  
• Max Current: 30A
  
• LiPo Cells: 2-3s
  
• BEC: Max 3A
  
• BEC Output: 6.0V/7.4V (adjustable by DiP switches)
  
• Motor Connectors: PH2.0 3Pin
  
• Dimensions(L*W*H): 30*22*11mm
  
• Weight: 16g

Package List:

• 1 * Micro Brushless ESC
  
• 1 * Battery Adapter Cable (Female XT30 to Male TRX-4M)
  
• 1 * Battery Adapter Cable (Female XT30 to Male JST-RCY)
• 1 * Instruction Manual