- Home
- Goosky Helicopter Parts
- Goosky S1 DFC Arm...
Goosky S1 DFC Arm Set
Include:
DFC Arm * 4
Use for:
Goo-sky S1
Type: | |
---|---|
Vendor: | |
SKU: |
GT030005 |
Weight: |
0.11 lb |
Product Spare Parts
installed but still having lift off problems
These little arms break easily. So buy extras, so you won't have much down time. I haven't had an opportunity to fly my S1 outside yet. So I'm limited to not much space inside. And the heli wasn't tuned quite as well as it could have been. So it drifted to the right too much. So I tried to tune it with the app. and my clumsy fingers slid one of the sliders way too much before I was even ready to make an adjustment. So then it was way too much off and drifted hard to the left and then crashed. So I'm going to have to wait for better weather now. I wish that the T8 transmitter had trim adjustment. It's really inconvenient to have to stop flying and get the bluetooth module set up and connected to your phone and then make the change before you can see if it made the correct adjustment. And if it didn't then you have to repeat the process. And if it crashes, the little DFC arms will easily break. I guess it's better than bending the main shaft or breaking the blades. There has to be a weak point somewhere. so I guess these little DFC arms are the best compromise.
Seems ok
Easy to assemble
Great service from helidirect and the heli came in great condition I fly it as often as possible. If you want a great beginner to expert complete stability heli then buy the goosky s1.
These break often especially in cold.
This is a must have backup part for the s1 , in the event of a crash they are what normally break . Recommend having a pack or 2 as backups
Came in fast. They are always quick with shipping items out. The component itself matched perfectly and is obviously a genuine Goosky arm linkage. Got me back into the sky practicing my invert!
Have to keep on hand they tend to break
Stock parts galore. I keep a bag of them. Fit great
installed but still having lift off problems
These little arms break easily. So buy extras, so you won't have much down time. I haven't had an opportunity to fly my S1 outside yet. So I'm limited to not much space inside. And the heli wasn't tuned quite as well as it could have been. So it drifted to the right too much. So I tried to tune it with the app. and my clumsy fingers slid one of the sliders way too much before I was even ready to make an adjustment. So then it was way too much off and drifted hard to the left and then crashed. So I'm going to have to wait for better weather now. I wish that the T8 transmitter had trim adjustment. It's really inconvenient to have to stop flying and get the bluetooth module set up and connected to your phone and then make the change before you can see if it made the correct adjustment. And if it didn't then you have to repeat the process. And if it crashes, the little DFC arms will easily break. I guess it's better than bending the main shaft or breaking the blades. There has to be a weak point somewhere. so I guess these little DFC arms are the best compromise.
Seems ok
Easy to assemble
Great service from helidirect and the heli came in great condition I fly it as often as possible. If you want a great beginner to expert complete stability heli then buy the goosky s1.
These break often especially in cold.
This is a must have backup part for the s1 , in the event of a crash they are what normally break . Recommend having a pack or 2 as backups
Came in fast. They are always quick with shipping items out. The component itself matched perfectly and is obviously a genuine Goosky arm linkage. Got me back into the sky practicing my invert!
Have to keep on hand they tend to break
Stock parts galore. I keep a bag of them. Fit great