Align T-REX 300X Combo

Align has best quality and packaging. This 300X is no exception. It comes pre assembled. I have not yet added my own flbl unit. Most likely will install a kbar. The only item that others have noted is an issue , the elevator push rod needs to be lengthen to make the swash level. The elevator servo sits below the left and right servos but they used the same push rod length on the elevator. Esc is a HobbyWing 25amp. You will need the HobbyWing programmer to set the governor and parameters.

Heli came with one of the cyclic servos dead on arrival. Reached out for support and radio silence. Ended up having to purchase a servo on my own. Mid quality helicopter. I expected better quality from Align.

Fun little back yard flyer

Very well built. Nice hardware.
Using Spektrum 6250hx and DX6E. Took a while to get configured. Got bad Swash type info from Align Shop for fbl. Once corrected to 3Servo 120, all was well. Just in Tuning phase now. Hopefully have maiden flight very soon. But we all know how it flies already, that's why we bought them😜

This is a BIG helicopter disguised in a little helicopter.
I've been flying the 600 & 700 size, and this little thing zips around
like it's bigger.
Very nice heli, I'll be flying this in my backyard for now on.

Helicopter kit came assembled. Fit and finish is exactly what you expect from Align.

I still disassembled everything and reassembled with loctite. Everything from the factory was loctited but better safe than sorry.

Helicopter flys well. Very zippy and fully capable. I paired mine up with a 6250hx & NX8.

I find myself smiling while flying this helicopter as much as I do with my 700. If you are looking for a smaller helicopter for your fleet this is the one to get.

My Align 300X arrived the other day along with a few other needed parts. Shipping was as expected/no delays and items arrived no damage. Love the quality of the heli and support team is great. Highly recommend HeliDirect.

Love the quality of the heli.
Did not like having to solder xt30 to esc, no tools for linkage adjustment, and no manuals on anything. And yes you will need a align esc programmer.
I love align products, and the 300x, so I will get over it.

good heli flies great

I bought the T-REX 300 because my Blade 230S had taken such a beating during my initial training, it's done it's job and will need to be replaced. The 300 is nicely built and a little heavier. I mated it up with a Spektrum 4651T & MicroBeast (MB) with a little difficulty that required some creative thought to solve; but, found a solution that appears to work. This Heli' flies like a bigger Heli, much higher head speed than the 230S, very stable with the MB like my other MB equipped Align Heli's. It came assembled, the only thing I found wrong was the elevator pitch link installed upside down. Picture Blade 230S vs T-REX 300.

Align has best quality and packaging. This 300X is no exception. It comes pre assembled. I have not yet added my own flbl unit. Most likely will install a kbar. The only item that others have noted is an issue , the elevator push rod needs to be lengthen to make the swash level. The elevator servo sits below the left and right servos but they used the same push rod length on the elevator. Esc is a HobbyWing 25amp. You will need the HobbyWing programmer to set the governor and parameters.

Heli came with one of the cyclic servos dead on arrival. Reached out for support and radio silence. Ended up having to purchase a servo on my own. Mid quality helicopter. I expected better quality from Align.

Fun little back yard flyer

Very well built. Nice hardware.
Using Spektrum 6250hx and DX6E. Took a while to get configured. Got bad Swash type info from Align Shop for fbl. Once corrected to 3Servo 120, all was well. Just in Tuning phase now. Hopefully have maiden flight very soon. But we all know how it flies already, that's why we bought them😜

This is a BIG helicopter disguised in a little helicopter.
I've been flying the 600 & 700 size, and this little thing zips around
like it's bigger.
Very nice heli, I'll be flying this in my backyard for now on.

Helicopter kit came assembled. Fit and finish is exactly what you expect from Align.

I still disassembled everything and reassembled with loctite. Everything from the factory was loctited but better safe than sorry.

Helicopter flys well. Very zippy and fully capable. I paired mine up with a 6250hx & NX8.

I find myself smiling while flying this helicopter as much as I do with my 700. If you are looking for a smaller helicopter for your fleet this is the one to get.

My Align 300X arrived the other day along with a few other needed parts. Shipping was as expected/no delays and items arrived no damage. Love the quality of the heli and support team is great. Highly recommend HeliDirect.

Love the quality of the heli.
Did not like having to solder xt30 to esc, no tools for linkage adjustment, and no manuals on anything. And yes you will need a align esc programmer.
I love align products, and the 300x, so I will get over it.

good heli flies great

I bought the T-REX 300 because my Blade 230S had taken such a beating during my initial training, it's done it's job and will need to be replaced. The 300 is nicely built and a little heavier. I mated it up with a Spektrum 4651T & MicroBeast (MB) with a little difficulty that required some creative thought to solve; but, found a solution that appears to work. This Heli' flies like a bigger Heli, much higher head speed than the 230S, very stable with the MB like my other MB equipped Align Heli's. It came assembled, the only thing I found wrong was the elevator pitch link installed upside down. Picture Blade 230S vs T-REX 300.