FrSky XM+ SBUS Mini Receiver
FrSky XM+ Receivers are now coming installed with ACCST 2.0 firmware. This is not compatible with ACCST 1.0 controllers and firmware updates will be required if there is a firmware mismatch. Firmware can be found here: https://www.frsky-rc.com/xm-plus-mini-sbus-non-telemetry-full-range/ (Select history firmware download for ACCST 1.0 firmware)
FrSky XM+ Ultra Mini SBUS Receiver, ONLY 1.6g
Specification
- Dimension: 21.5x12x3.5mm(LxWxH)
- Weight: 1.6g
- Number of Channels: Up to 16CH from SBUS(CH1~CH15 for PWM, CH16 RSSI for FC)
- Operating Voltage Range: 3.7~10V
- Operating Current: 30mA@5V
- Operating Range: FULL range
- With RSSI output on board: Analog 0~3.3V
- Firmware Upgradeable
- Compatibility: FrSky D16 mode
- No Telemetry
Includes
- 1 X FrSky XM+ SBUS Mini Receiver
How to
Product Spare Parts
I use this as a redundant receiver with a RX8R Pro as the primary receiver. It is easy to do this and adds an extra layer of protection, especially in an EDF that is full of wires, both control and power. I'd give it 5 stars if the pins were soldered on, but, then again, not everybody wants that.
Fast shipping. New and sealed
Nice receiver. Has rssi on aux 12. Fits well in small 3" quad. Easy binding. Excellent!
I couldn't afford to buy a crossfire receiver for each of my racing drones so I had to go with these and these were at a good price
I have two of this used in my quads and I am so impress on the performance I definitely recommend this receiver
Would not bind with my older FrSky QX7, firmware version 2.3.0 (5d19f711) date: 2019-09-05 eepr 219. FrSky has a version of ACCST XM+ firmware on their website which I tried, but it didn't work. I found an older version (XM+170313) that does work here: https://davesdronedesigns.com/frsky-firmwares/. I got instructions on how to flash the receiver here: https://www.youtube.com/watch?v=ZUqaNiE5V-I
Helidirect sent my XM plus receiver hella fast! I was up and flying in a matter of days! 16 channels and long range, perfect!
I have bought a few off these and they work great. I have had issues with the last one as it will not bind. I was able to load correct firmware. I am not sure what I am doing wrong.
Amazing product quick response overall great experience.
Great receiver, good range. Perfect for my GTR249 Diatone.
I use this as a redundant receiver with a RX8R Pro as the primary receiver. It is easy to do this and adds an extra layer of protection, especially in an EDF that is full of wires, both control and power. I'd give it 5 stars if the pins were soldered on, but, then again, not everybody wants that.
Fast shipping. New and sealed
Nice receiver. Has rssi on aux 12. Fits well in small 3" quad. Easy binding. Excellent!
I couldn't afford to buy a crossfire receiver for each of my racing drones so I had to go with these and these were at a good price
I have two of this used in my quads and I am so impress on the performance I definitely recommend this receiver
Would not bind with my older FrSky QX7, firmware version 2.3.0 (5d19f711) date: 2019-09-05 eepr 219. FrSky has a version of ACCST XM+ firmware on their website which I tried, but it didn't work. I found an older version (XM+170313) that does work here: https://davesdronedesigns.com/frsky-firmwares/. I got instructions on how to flash the receiver here: https://www.youtube.com/watch?v=ZUqaNiE5V-I
Helidirect sent my XM plus receiver hella fast! I was up and flying in a matter of days! 16 channels and long range, perfect!
I have bought a few off these and they work great. I have had issues with the last one as it will not bind. I was able to load correct firmware. I am not sure what I am doing wrong.
Amazing product quick response overall great experience.
Great receiver, good range. Perfect for my GTR249 Diatone.