- Home
- Receivers & Telemetry
- Spektrum Remote Receiver Extension...
Spektrum Remote Receiver Extension 9
Key Features:
- 9-Inch Remote Receiver Extension
Overview:
- This is the cable that runs between the main receiver and the remote (satellite) receiver. This cable has a female connector on both ends. If you wish to lengthen your remote receiver cable please see the other cables of various lengths or look into the extensions with quick disconnects (SPMAJST3 & SPMAJST6). You can utilize a standard servo extension between the two ends of the extension with quick disconnect.
NOTE:
- Do not exceed 36 inches in total extension length.
Type: | |
---|---|
Vendor: | |
SKU: |
SPM9011 |
Weight: |
0.13 lb |
Product Spare Parts
It's great helps put my receiver exactly we're it needs to be
It’s a set of wires with plugs on each end. Woohoo!!!
good
Makes cable management much easier
The 9 inch extention wires work like they should to extend the remote recovers
worked as it should!
The shorter length works out much better than the stock 24". Makes the overall wire routing much cleaner and far less likely to come into contact with moving parts by accident.
Installed this 9 inch extension on my Goblin 380 to add an additional remote satellite receiver underneath the frame of my helicopter. The initial receiver came with a 24inch extension which was way to long. The 9 inch is a perfect length for this application in addition to the other 6 inch extension I am using for the remote receiver on the side of the heli.
It's great helps put my receiver exactly we're it needs to be
It’s a set of wires with plugs on each end. Woohoo!!!
good
Makes cable management much easier
The 9 inch extention wires work like they should to extend the remote recovers
worked as it should!
The shorter length works out much better than the stock 24". Makes the overall wire routing much cleaner and far less likely to come into contact with moving parts by accident.
Installed this 9 inch extension on my Goblin 380 to add an additional remote satellite receiver underneath the frame of my helicopter. The initial receiver came with a 24inch extension which was way to long. The 9 inch is a perfect length for this application in addition to the other 6 inch extension I am using for the remote receiver on the side of the heli.