Join Our newsletter
Subcribe to get information about products and coupons
Earn 179 Reward Points when you buy this item.
Couldn't load pickup availability
- Fuel Gauge Technology
No more guessing when it comes to power available throughout your flight. With the Fuel Gauge, you can push the limit of flight time to the very last second, all the while keeping your batteries in perfect health, no matter how hard you fly.
- Low Battery Alert
Depending upon the compatibility of the transmitter in use, this feature alerts you when a discharged LiPo battery is connected to the aircraft, sparing the aircraft and battery from possible damage or failure.
- Onboard Data Logging
Augmenting or replacing the data logging capabilities of the ESC in use, this new feature allows you to access multiple flights worth of data logging capability when no such options are offered via the ESC in use. From cyclic & collective inputs, this data will be logged within the iKON2, and depending upon transmitter capability, can be viewed via the transmitter in use for instant updates or can be analyzed via PC.
- Thermal Overload Protection
Protect your investment with real time thermal data. Monitor ESC temps and set the appropriate alarms to avoid unexpected ESC thermal shut downs and possible ESC failure. With this all new feature, you can push your heli to the max without the worry of thermal overload.
- No Costs, No Extra Hardware Required
Simplified to the extreme, the above features require (1) single wire to connect the ESC to the iKON2, unlocking these amazing features. Simple & effective, this update requires nothing but the basics with no costs involved.
Note: most new features only available on the iKon2, but updates continue to optimize flight performance on all iKon's!
Be sure your PC is connected to the internet
Download and install the iKon software if you have not already done so //www.ikonflybarless.com/download
Power up your iKon (max 2s LiPo, watch polarity, and never apply power to 4-5-6/bind) and plug it into your PC using a micro USB cable - not included. If you see driver installation start, wait for this to complete.
Now start the iKon software. Be sure to accept any software updates, and then be sure to accept any firmware updates offered.
Your iKon should now be running the latest firmware version.
Dimensions | 33.9mm x 21.3mm x 15mm (LxWxH) |
Weight | 11.1g |
Power input | 4,5V to 15V with one or two (redundant) lines from BEC or (2S minimum) Li-Po (7.4V) or Li-Ion (7.4V) or Li-Fe (6.6V) or 5/6/7 NiCd -NiMh |
Application | Electric, Nitro, Gasser Compatible |
Receiver Support |
Spektrum: Bidirectional SRXL2 (with telemetry) / Bidirectional SRXL (with telemetry) / Unidirectional SRXL / DSM2 22mS / DSM2 11mS / DSMX 11mS / PPM / Remote RX Futaba: S.Bus2 (with telemetry) / S.Bus / PPM Jeti: EX-BUS (with telemetry) / UDI / PPM+ / PPM- Graupner: SUMD (with telemetry) / SUMO FrSky: S.Bus + Smart.Port (with telemetry) / F.Port (with telemetry) / F.Port2 (with telemetry) / F.Bus (with telmetry) / S.Bus JR: X-Bus A (with telemetry) / X-Bus B / DMSS Align: DMSS Hitec: S.Bus RadioLink: S.Bus TBS: Crossfire (with telemetry) / S.Bus / PPM ELRS Crossfire (with telemetry) FlySky: i-Bus PowerBox: P2Bus (with telemetry) / SRXL-16 |
Telemetry input |
From ESC on electric models: Castle Creation / Hobbywing / Align / Scorpion / Kontronik / YGE / Spektrum / FrSky / OMP / ZTW / ZDFly / Graupner From Temperature sensors on Nitro / Gasser / Turbine models: Jeti / Futaba From RPM Sensors: All sensor brand (Possibility to monitor separately also the RPM of the tail motor) From Variometer (Altitude, Vertical Speed): Jeti on SAT2 connector / FrSky / Futaba / Robbe / Graupner sensors on Bus Quality Of Signal (QOS) received: For all receivers brand Quality of Servo Voltage input: For all kind of Power input: ESC BEC, external/separate BEC, Lipos/Li-Ion/Li-Fe/NiCd/NiMh, Backup Power Systems |
Telemetry output | Spektrum / Futaba / Jeti / Graupner / Multiplex / OpenTX / EdgeTX / Ethos / TBS / ELRS / JR / PowerBoxSystem / FlySky |
Cyclic Servo Support | 760us/ 1520us - Up To 560Hz Frequency |
Tail Servo Support | 760us/ 1520us - Up To 560Hz Frequency |
Motorised Tail | Supported |
Governor | Support: Electric, Nitro, Gasser Governor range: 800-6500 RPM Autorotation Bailout function: Supported |
Included:
Note: Most new features only available on the iKon2, but updates continue to optimize flight performance on all iKon's! Some features require an iKon/iKon2 with governor functionality.
All New Updates for the iKON2!
Always pushing the boundaries, iKON2 flight controllers now have access to all new capability & functionality via the latest iKON firmware update, allowing you to unlock even greater potential for the best flybarless system on the planet!
Free and feature packed, the iKON2 firmware update features the below updates:
Fuel Gauge Technology
No more guessing when it comes to power available throughout your flight. With the Fuel Gauge, you can push the limit of flight time to the very last second, all the while keeping your batteries in perfect health, no matter how hard you fly.
Low Battery Alert
Depending upon the compatibility of the transmitter in use, this feature alerts you when a discharged LiPo battery is connected to the aircraft, sparing the aircraft and battery from possible damage or failure.Onboard Data Logging
Augmenting or replacing the data logging capabilities of the ESC in use, this new feature allows you to access multiple flights worth of data logging capability when no such options are offered via the ESC in use. From cyclic & collective inputs, this data will be logged within the iKON2, and depending upon transmitter capability, can be viewed via the transmitter in use for instant updates or can be analyzed via PC.
Thermal Overload Protection
Protect your investment with real time thermal data. Monitor ESC temps and set the appropriate alarms to avoid unexpected ESC thermal shut downs and possible ESC failure. With this all new feature, you can push your heli to the max without the worry of thermal overload.
No Costs, No Extra Hardware Required
Simplified to the extreme, the above features require (1) single wire to connect the ESC to the iKON2, unlocking these amazing features. Simple & effective, this update requires nothing but the basics with no costs involved.
Supported ESC's
Upon release, the iKON2 supports the below ESC's for data logging & telemetry capability, and as time progresses, more ESC's will be added to this list.
- Castle / Castle Live Link
- HobbyWing (V4 or Newer)
- Kontronik Jive / HeliJive
- Scorpion Tribunus (beta version at this time)
Supported Transmitters
Below is a list of the current transmitters supported in relation to the iKON2 data logging & telemetry. However, if your transmitter is not yet supported, please note you can easily access all data logging & telemetry via the iKON2 after subsequent flights.
- Spektrum
- Futaba
- Jeti
Transmitter Options
With Spektrum Gen2 (or newer) and Futaba transmitters, you are able to access & set the below functions to utilize in flight. Further, the iKON2 is now able to utilize SRXL for further telemetry options via receivers that offer this capability, such as the Spektrum SPM4649T dual diversity receiver.
- mAh Consumed via Battery Fuel gauge
- Temperature Threshold Alarms
- Live Current Draw
For Jeti Tx users, the iKON2 has the ability to send all logged parameter info, which can be viewed & logged via the Tx for greater levels of access & overview. From collective & cyclic inputs, gyro status, governor status, and iKON2 received frames, this all new update offers massive levels of user feedback and adjustments, such as remote access to governor features & more.
iKON2 Data Logging Capabilities
- mAh Consumed via Battery Fuel Gauge
- Current
- RPM
- LiPo Battery Voltage
- Voltage Ripple
- Receiver / BEC Voltage
- ESC Power Out
Jeti Tx Options
- RxRoll / RxElev / RxPitch / RxTail / RxThrottle / RxAux
- Setup Number
- SwashRoll / SwashElev
- Pitch Out
- Throttle Out
- Governor Engaged
- Rx Frame Rate
- Aileron Rotation Rate / Elevator Rotation Rate / Tail Rotation Rate
- Vibration levels (future update)
Event Logs
PC Software
New Rescue Function
Vibration Logs
Được hỗ trợ
verb: chịu đựng, chống đở, ủng hộ
Vendor: | iKON Flybarless |
SKU: | iKON2005 |
Barcode: | 769923251752 |
Availability: | In Stock |
Product Type: | Heli Flybarless Systems |
Weight: | 0.3 lb |
Works perfectly and the software is easy to use and understand.
Marchandises a confirmé à la commande, livraison dans le délais, bravo les services
Mini iKON 2 Flybarless System
Maybe I got a lemon, but have read about this problem happening to others.
Setup went fine, no issues and the software was easy to use. At the field for first flight I powered the heli and got no power to the servos, yet the rx powered on. Checked all connection, servos, esc, bec and everything looked nominal. Powered heli again and servos powered up then cutout just before arming for the flight. After that they would power intermittently, then ultimately failed. No voltage on servo bus from the FBL. Tried BEC, direct 2s pack to no avail. The unit would not power after this except on USB.
Trust lost in Ikon and went with another brand.
Mini iKON 2 Flybarless System
Excellent FBL Controller!
I have change all my heli’s over to Icon2. Great FBL unit!
I fell in love with the ikon's, I change all the spektrum FBL with it
Great product great service
As usual but now mini sized the mini is awesome and amazing!!! Easy to setup, I can do it from my phone at the field!!!
Thanks for subscribing!
This email has been registered!