Join Our newsletter
Subcribe to get information about products and coupons
Earn 29 Reward Points when you buy this item.
The order quantity exceeds the stock!
Related Products
Perfect for Oxy heli 2 upgrade
- 3-6S LiPo
- Built-in BEC 5V-8V (default 5V)
- Firmware upgrade and programming via WiFi Express module or LCD program box (purchase separately)
| Model | Platinum 25A ESC V4 |
| Input Voltage | 3-6S LiPo |
| Cont./Peak Current (10s) | 25A/40A |
| Application | > 450 heli or a small fixed wings aircraft |
| (Switch-mode) BEC | Switch Mode:6V/7.4V,3A |
| Separate Programming Port | For connecting LCD Program Box/WIFI Express |
| Throttle Signal/BEC Output/RPM Signal Transmission Wire(s) | White Throttle Signal Wire/Red & Black BEC Output Wires/ Yellow RPM Signal Transmission Wire |
| Input Wires | Red-16AWG-100mm*1/Black-16AWG-100mm*1 |
| output wires | Black-18AWG-75mm*3 |
| Output connectors | 3.5mm Gold Connectors (Female) |
| Weight/Size | 27g / 47x22x10mm |
Download
Users_manual_Platinum25A.pdf HOBBYWING Governor function explained (PDF)
| Vendor: | HobbyWing |
| SKU: | Platinum-25A-6S-V4 |
| Barcode: | 088718502788 |
| Availability: | In Stock |
| Product Type: | Heli ESCs |
| Weight: | 0.25 lb |
You may also like
RadioMaster Nexus Helicopter Flybarless Control Unit - RotorFlight
SKU : HP0157.0087
$95.99
(
15
Reviews
)
Tron Tail Case Bearings - 5.5 Gemini/Orion / Dnamic / 5.8 / Nitron / Nitron90
SKU : TR506-511
$9.00
No Review
Tron Tail Blade Holder Thrust Bearing Set - 5.5 Gemini/Orion / Dnamic / 5.8 / Nitron / Nitron90
SKU : TR506-491
$5.00
No Review
Tron Tail Blade Holder Bearing Set - 5.5 Gemini/Orion / Dnamic / 5.8 / Nitron / Nitron90
SKU : TR550-401
$9.00
No Review
Tron Main Grip Bearing Set - 5.5 Gemini/Orion / 7.0 / Dnamic / Nitron / Nitron90
SKU : TR506-105
$13.70
No Review
Recently Viewed Products
Customer Reviews
Based on 6 reviews
67%
(4)
17%
(1)
17%
(1)
0%
(0)
0%
(0)
h
This is a good light speed controller to install, but i don’t know if it can connect for both dual rate motor.
M
I love the hobbywing ecs. I have this 25amp esc on a blade 300x modified to spin 270 mm blades with high voltage servos and tail. I am using beastx FBL. Doing pitch pumps caused me to lose control of the servos. The BEC is only rated at 3 amps.
B
Seems good quality installed in Oxy2 but removed because on ANOTHER bad program box I think heli direct will take care of ten issues usually always have
B
I have one of these installed in a very light 300 sized helicopter (spins 315mm main blades). Works well for the sport type flying that I do with this helicopter. Would probably opt for something with a higher rating if I were able to fly hard 3D, but who I am I joking...... I cannot fly that hard if I wanted to! This ESC is light, small, inexpensive, and easy to set up. A winner in this application!
T
Easy setup and perfect size for my Oxy 2
D
Easy to set up.
- Choosing a selection results in a full page refresh.