- Home
- 1/12 Scale Truck
- 8937 Suzuki Jimny (Metallic...
8937 Suzuki Jimny (Metallic Blue) 1/12 Scale 2WD RTR Monster Truck Q-Series
8937-QM2-Suzuki Jimny V.2 (Metallic Blue) 1/12 Scale 2WD RTR Monster Truck Q-Series
Features:
ESC -40A WP-1040-Brushed (Powered by HOBBYWING)
-Water-proof and dust-proof for all weather.
-Built-In Capacitor Module.
-Automatic throttle range calibration.
-Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery.
-Over-Heat protection and throttle signal loss protection.
-Easily programmed with jumpers.
Motor
-RS-540High Torque Motor
-Powered By Mabuchi Motor.
Servo
-6Kg Servo O.E.M. by Savox. 4.8V 0.16 sec/60° 4.2 kg-cm 6.0V 0.14 sec/60° 6.5 kg-cm 25T Horn Gear Spline
Radio System
- Pistol-Grip Mod-3S 3 Channel Transmitter
- Digital Trimming
- Steering Dual-Rate (ST D/R) Adjustment
- End Point Adjustment (EPA)
- Build in Failsafe
- Power Alarm Transmitter Model: 82190 Frequencies: 2.4GHz Weight: 375gm Power Supply: 4 AA Alkaline Dry Cells DC 6V
-Receiver Receiver Model: G82191 Frequency: 2.4GHz Power Supply: DC 4.8~6.0V Chassis:
-DVP (Dual Vertical Plate) Chassis Design
-Sealed Receiver Compartment
-Easy Access/Quick Release Battery Tray
-Battery Tray Size 146x50x25mm - Adjustable Wheelie Bar Ready (w/Ball Bearing)
-Full Precision Ball Bearing Support
-Adjustable Turnbuckles
-Harden Steel Steering Drag Link
-Fully Equipped with Allen Hex Screws
-Adjustable Body Post
-High Torque Servo Horn Safer -Optional 4-Wheel Steering Design Suspension:
-Big Bore Oil Filled Coil Over Shocks
-Aluminum Shock Caps
-10mm over size shock body with 3mm hardened steel polished shaft.
-Stiff Hard Racing Spring
-Fixed Wheelbase -Ride Height
-Adjustable with pre-load
-Realistic 4-Link Suspension design Drivetrain:
-2 Wheel Drive.
-Center Shaft Drive Train for more power transferred to the wheels.
-Hight Efficient Transmission System.
-Wide Range Easy Changeable Gear Box Design.
-Sealed transmission eliminates dirt and dust substances to get in.
-Sealed Axle housing. -5mm Hardened Steel Axle shaft. -Differential Metal Center Locker Front/Rear Planetary Gear Type
-Ring & Pinion 30/15T. Specs: Item Number: 8930-QM2-Suzuki Jimny (Stock Yellow)
Length: 11inch (280mm) Width: 10.60inch (270mm) Wheelbase: 8.2inch (210mm) Ground Clearance: 2.6inch 65mm
Type: | |
---|---|
Vendor: | |
SKU: |
CEG8937 |
Weight: |
15.0 lb |
Product Spare Parts
Great truck! I've ben into RC for over 30 years and can tell you this is a well built truck. If you are looking for something that you can just have fun with and modify to your own discreation later , This is it. Tamiya lunchbox bodies will fit, lots of CEN options. fun factor--off the charts
These guys are awesome
Great truck! I've ben into RC for over 30 years and can tell you this is a well built truck. If you are looking for something that you can just have fun with and modify to your own discreation later , This is it. Tamiya lunchbox bodies will fit, lots of CEN options. fun factor--off the charts
These guys are awesome