Security Verified
   
Castle Creations CC BEC 10A 6S Switching Regulator (#010-0004-00)1

Castle Creations CC BEC 10A 6S Switching Regulator (#010-0004-00)


SKU: CASTLEBEC
Our Price:  $21.30 
Qty:  


 Free Super Saver Shipping Eligible (See Details)




Product description

CC BEC SWITCHING REGULATOR
Current Output:
Peak: 10 amps
Continuous:
<12 volts input = 7 amps*
<24 volts input = 5 amps**Ratings are determined with a 5mph airflow on the BEC. Servo connectors are not rated for current in excess of 5 amps. Users are encouraged to replace the connectors if more than 5 amp currents are anticipated.
Output Voltage:
Output 5.1 volts out of the package, user may set output voltage from 4.8 to 9 using the Castle Link (sold separately).
Input Voltage:
5v to 25.2v (2S to 6S LiPo)
Length:
Width:
Height:
1.2” (30mm)
0.6” (15mm)
0.4” (10mm)
Weight:
0.4 oz (11 grams)
No small animals or interns were harmed in the incredibly long development of this product. Some engineers maybe, but that is a personal matter. They are fine now.

What the heck is a BEC?
Our Battery Eliminator Circuit is a little device that eliminates the need for a receiver and servo battery pack. It draws higher voltage from the motor batteries and drops it to a voltage level that is suitable for your receiver and servos. This is required in applications which draw high power for multiple servos or use more than 3S motor packs, as most ESCs with linear BECs are not designed for these applications.

CC BEC is better because it is smaller, cheaper, and far more powerful.

See the CC BEC User Guide for more details.

 

CC BEC Wiring Diagram

CC BEC MULTI-PACK INSTALLATION


Find something wrong in this description?
Help us fix it! Report An Error


This product was added to our catalog on Monday 22 October, 2007.
Part & Accessory

This product was added to our catalog on Monday 22 October, 2007.


Customers who bought this product also purchased
  • Western Robotics Tail Servo Step-Down Voltage
    [WRL-STVR]
    $4.95
  • Western Robotics Hercules Super BEC PRO Mini - 18s, 16A/22A Peak - No BUS
    [WRL-HBECSPM]
    $118.97
  • Western Robotics Hercules Super BEC G2 14s 15a/20A Peak 7.4V / 8.2V
    [WRL-HBECS2]
    $107.97
  • Western Robotics Tail Servo Step-Down Voltage w/ LED
    [WRL-STVRL]
    $5.97
  • HobbyWing Switchable U-BEC 3A (2-6S)
    [3A-UBEC]
    $8.40
  • Hercules BEC Linear 2S 10amp
    [WRL-HBEC-LE]
    $47.97
  • Western Robotics Hercules BEC High Current
    [WRL-HBECHC]
    $42.99
  • Gryphon Low Voltage Display LED Board (GDB-1010)
    [GDB-1010]
    $7.99
  • Hercules Super BEC Pro 18s 16A/22A Peak
    [WRL-HBECSP]
    $118.97
  • Western Robotics Battery Buffer
    [WRL-BBFR]
    $24.97
  • Hobbywing UBEC 5A HV BL ESC for Aircraft and Heli
    [UBEC-5A-HV]
    $34.95
  • Scott Gray REACTOR HVX regulator system
    [SGH5690]
    $134.95
Product Reviews  
Write review
0 out of 0 people found the following review helpful:
Rating: 5 of 5 Stars!
12/26/2012
Reviewer:Richard   
This is a great fit for the Trex 250 DFC/SE. If your using the AR7200BX, use this BEC along with the stock ALIGN ESC/BEC. Just for the CC instructions for eliminating the red wire to the ESC. This upgrade will ensure you DO NOT experience a power cut off with the stock ESC/BEC.
Was this review helpful to you?  
Helpful yes
Helpful no
1 out of 1 people found the following review helpful:
Rating: 3 of 5 Stars!
05/03/2011
Reviewer:richard   
Really nice BEC, but I had two fail on me trying to use it on a 12S system. Wired it exactly like on Castle Creations website and even spoke to one of the engineers at CC before I went 12s. Works fine for any 3s-6S applications. Gets warm to the touch but never gives out. Used on 6S 600, 6S 500, and 3S 450pro.
Was this review helpful to you?  
Helpful yes
Helpful no
2 out of 2 people found the following review helpful:
Rating: 5 of 5 Stars!
04/01/2010
Reviewer:Derrick   
for those of you running or thinking of running this anything larger than a 500-size model, read this from Castle tech:_br /__br /_http://www.castlecreations.com/support/cc_bec_usage_advisory1.html
Was this review helpful to you?  
Helpful yes
Helpful no
0 out of 0 people found the following review helpful:
Rating: 5 of 5 Stars!
02/28/2009
Reviewer:philip   
I think for the money thses are the best you can get,small and light weight,and you can change the output voltage with the castle link.10amp is quite good and i beloieve it will hold up.
Was this review helpful to you?  
Helpful yes
Helpful no
0 out of 0 people found the following review helpful:
Rating: 5 of 5 Stars!
01/29/2008
Reviewer:Bruce   
If your looking for the best, well this is it! My CC Phoenix 35 was running very hot cause the internal BEC on it couldn't handle the stress of running the motor, 4 servos, 1 being a 4.8v digital. And also powering the gyro and receiver. After installing this beauty, and setting my voltage on the BEC with the Castle Link, everything has very dramatically cooled off. Nothing gets hot anymore. I'm now getting the performance out of this Heli that has done nothing but impress the hell out of me! I can't say enough good things that this little BEC has done for me! I highly recommend! Thank you HeliDirect and Castle Creations!
Was this review helpful to you?  
Helpful yes
Helpful no
0 out of 1 people found the following review helpful:
Rating: 5 of 5 Stars!
11/20/2007
Reviewer:Mike   
I bought 2 of these and one wouldn't program so is stuck at the 5.1v default voltage, other than that these are great, goodbye 2 cell lipo and align regulator, saves about 100g on trex 600 setup.
Was this review helpful to you?  
Helpful yes
Helpful no
0 out of 0 people found the following review helpful:
Rating: 5 of 5 Stars!
11/08/2007
Reviewer:Michael   
This BEC is very great! you need the castle link to program the BEC output voltage, and it work fine, easy to program with the computer, i have programmed 6.0V for my Trex 450 SE (HS65HB+GY401+9650) and in the receiver output i have 5.9V! Very small and light BEC , i love!
Was this review helpful to you?  
Helpful yes
Helpful no
Write a Review
Share your feedback with other customers by writing a review! Please limit your comments to this specific product. All posted reviews are monitored within the first 24 hours. HeliDirect.com reserves the right to remove any content that we deem inappropriate for any reason.

* For any after-sales questions, you can contact Customer Service and get a response within 24-hours.

We recommend that you login first, so that you can manage and edit your reviews through your HeliDirect.com account.

Write a review sign
Indicates required fields*
Rating::
Your Name:
Your Email:*  
Review Title
Upload images from your computer:

Error, unable to read session id.Type the text you see in the
image on the right:( required)

Please describe the error you encountered in the product description. If you have unrelated questions we are happy to assist you at (877) 439-4354.

Join our community :
Add us on Facebook
Follow us on Twitter
Watch us on Youtube
Follow us on Pinterest